 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 500W with PFC and Parallel Function Features : PSP-500 series Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Foced air cooling by built-in DC fan Current sharing up to 2000W(3+1) With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE PSP-500-5 5V 80A 0 ~ 80A 400W PSP-500-12 12V 41.5A 0 ~ 41.5A 498W 150mVp-p 10 ~ 13.2V 1.0% 0.3% 0.5% PSP-500-13.5 13.5V 37A 0 ~ 37A 499.5W 150mVp-p 12 ~ 15V 1.0% 0.3% 0.5% PSP-500-15 15V 33A 0 ~ 33A 495W 150mVp-p 13.5 ~ 18V 1.0% 0.3% 0.5% PSP-500-24 24V 20.8A 0 ~ 20.8A 499.2W 150mVp-p 20 ~ 26.4V 1.0% 0.2% 0.5% PSP-500-27 27V 18.5A 0 ~ 18.5A 499.5W 150mVp-p 24 ~ 30V 1.0% 0.2% 0.5% PSP-500-48 48V 10.5A 0 ~ 10.5A 504W 200mVp-p 41 ~ 56V 1.0% 0.2% 0.5% RIPPLE & NOISE (max.) Note.2 100mVp-p 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 0.5% 2.0% 24ms at full load Note.6 90 ~ 264VAC 1500ms, 50ms at full load 127 ~ 370VDC 0.98/100VAC at full load 82% 3.5A/230VAC 40A/230VAC 82% 82% 84% 84% 86% 47 ~ 63Hz 0.95/230VAC 76% 7A/115AVC 20A/115VAC <1mA / 240VAC 110 ~ 125% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover RTH2 95 Detect on heatsink of Q1,Q7 power transistor & L3 output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <4 ~ 10mA -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH with 30CFM forced air non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 130.1K hrs min. MIL-HDBK-217F (25 278*129*63.5mm (L*W*H) 2.6Kg; 6pcs/15.7Kg/0.89CUFT ) OTHERS NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. In parallel connection, maybe only one unit operated, if the total output load less than 5% of rated load condition. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:PSP-500-SPEC 2006-04-13 500W with PFC and Parallel Function Mechanical Specification PSP-500 Case No. 919A series Unit:mm 220 4-M3 16 127 113 30 20 7 5 4-M3 4-M3 Air flow direction 127 I/P 1 2 3 7 240 251 278 10 113 1 2 3 4 5 6 O/P 13 10 51 62 73 84 5 7 LED ADJ. CONTROL 34.5 20 63.5 4-M3 240 220 TOP VIEW 15 BOTTOM VIEW AC Input Terminal Pin. No. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG DC Output Terminal Pin. No Assignment Pin No. 1~3 4~6 Assignment DC OUTPUT +V DC OUTPUT -V Control Pin. No Assignment : MOLEX 5559-NP uses 5558 male crimp terminal Mating connector Terminal Pin No. Assignment Pin No. Assignment 1 P(Current share) 5 NC MOLEX 5556 2 -S 6 PF(Power fail signal) MOLEX 5557-NR Female crimp Terminal G +S 3 7 receptacle RCRC+ 4 8 Derating Curve Output Derating VS Input Voltage 12 ~ 48V 100 100 90 80 80 60 5V 70 LOAD (%) 40 LOAD(%) 0 10 20 30 40 50 60 (HORIZONTAL) 60 50 40 20 -10 90 115 135 180 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:PSP-500-SPEC 2006-04-13 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 500W with PFC and Parallel Function Control terminal instruction manual PF G +5V PSP-500 series RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC -V -V -V +V +V +V LOAD + POWER SIGNAL -V -V -V +V +V +V LOAD + -V -V -V +V +V +V DC 0~15V LOAD + Power Fail Signal PF Signal is the voltage difference between "G" and "PF" pin output Remote Sensing Remote Control Power ON: When V RC+ , RC- =0 ~ 0.8V or Open Power OFF: When V RC+ , RC- =4 ~ 10V Parallel Operation RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC -V -V -V +V +V +V -V -V -V +V +V +V -V -V -V +V +V +V LOAD + Parallel Operation With Remote Sensing RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC RC- RC+ G -S P +S PF NC -V -V -V +V +V +V -V -V -V +V +V +V LOAD + -V -V -V +V +V +V DC 0~15V Parallel Operation With Remote Control File Name:PSP-500-SPEC 2006-04-13 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 500W with PFC and Parallel Function Features : PSP-500-P series Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Foced air cooling by built-in DC fan Current sharing up to 2000W(3+1) With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE PSP-500-5P 5V 80A 0 ~ 80A 400W PSP-500-12P 12V 41.5A 0 ~ 41.5A 498W 150mVp-p 10 ~ 13.2V 1.0% 0.3% 0.5% PSP-500-13.5P 13.5V 37A 0 ~ 37A 499.5W 150mVp-p 12 ~ 15V 1.0% 0.3% 0.5% PSP-500-15P 15V 33A 0 ~ 33A 495W 150mVp-p 13.5 ~ 18V 1.0% 0.3% 0.5% PSP-500-24P 24V 20.8A 0 ~ 20.8A 499.2W 150mVp-p 20 ~ 26.4V 1.0% 0.2% 0.5% PSP-500-27P 27V 18.5A 0 ~ 18.5A 499.5W 150mVp-p 24 ~ 30V 1.0% 0.2% 0.5% PSP-500-48P 48V 10.5A 0 ~ 10.5A 504W 200mVp-p 41 ~ 56V 1.0% 0.2% 0.5% RIPPLE & NOISE (max.) Note.2 100mVp-p 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 0.5% 2.0% 24ms at full load Note.5 90 ~ 264VAC 1500ms, 50ms at full load 127 ~ 370VDC 0.98/100VAC at full load 82% 3.5A/230VAC 40A/230VAC 82% 82% 84% 84% 86% 47 ~ 63Hz 0.95/230VAC 76% 7A/115AVC 20A/115VAC <1mA / 240VAC 110 ~ 125% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover RTH2 95 Detect on heatsink of Q1,Q7 power transistor & L3 output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH with 30CFM forced air non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 sink current <4 ~ 10mA 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL1950, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 130.1K hrs min. MIL-HDBK-217F (25 ) 250*123*50mm (L*W*H) 1.3Kg; 6pcs/7.8Kg/0.89CUFT OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:PSP-500-P-SPEC 2006-04-13 500W with PFC and Parallel Function Mechanical Specification 250 PSP-500-P series Unit:mm Air flow direction I/P 1 123 113 230 2 3 88 I/P 9.5 1 2 FS1 3 10A/250V 8 CN1 SVR2 Io ADJ. CN2 12 7 1 5 6 SVR1 Vo ADJ. 5 3.2 153 87 5 6- 9.5 176 4 8 AC Input Terminal Pin. No. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Connector Pin. No. Assignment (CN1) : JST B2B-XH or equivalent Pin No. 1 2 Assignment GND +12V Mating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent Connector Pin. No. Assignment (CN2) : JST B7B-XH or equivalent Assignment Pin No. P(Current share) 1 +S 2 -S 3 GND 4 Terminal Mating Housing Assignment Pin No. Power fail signal 5 JST SXH-001T-P0.6 JST XHP RC+ 6 or equivalent or equivalent RC7 DC Output Terminal Pin. No Assignment Pin No. 1~3 4~6 Assignment DC OUTPUT +V DC OUTPUT -V Derating Curve Output Derating VS Input Voltage 12 ~ 48V 100 100 90 80 80 60 5V 70 LOAD (%) 40 LOAD(%) With 30CFM forced air 60 50 40 20 -10 0 10 20 30 40 50 60 (HORIZONTAL) 90 115 135 50 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:PSP-500-P-SPEC 2006-04-13 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice |
Price & Availability of PSP-500
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |